About brettkugler

brettkugler · 07-26-2016

I am trying to load the output variable of a previous task (a provisioned IP addess) into the powershell task to do further customization. The input field won't accept the standard variable notation (I've tried many permutations). I might be misund...

brettkugler · 03-17-2014

I'm doing some preliminary exploration of the UCS Director REST API and there seems to be two flavors. The "legacy" API which supports JSON and seems to be what is primarily documented in the Developer Guide 4.1, and the Cloupia API, which is XML ba...

brettkugler · 10-28-2016

Hi Tomas, Hopefully this is still being monitored. I am trying to setup syslog to a remote syslog server in the APIC. I created a Syslog Monitoring Destination Group with a remote destination. I entered the IP address and port for the remote syst...

brettkugler · 07-27-2016

Well, after a long day of learning - and seeing how far off I was - here's core dump of what I was missing. I will try to clean this up later, but hopefully it will help any other lost souls.**** HOW TO BUILD A WORKFLOW PROPERLY **** Note- A standar...

brettkugler · 05-17-2016

Just a follow up here - the issue was related to SSH configuration on the device. Here is the offending line -ip ssh source-interface Loopback0Enabling ssh on the Loopback0 interface causes the bundle install to fail.

brettkugler · 04-22-2016

I have narrowed it down to something in my config. If I clear the config and do the bundle install, it works. I now need to narrow down what is conflicting.

brettkugler · 04-19-2016

Thank you for the suggestion. I did consider drive space, but did not know about the recommended minimum. However, I do have plenty of space available:994918400 bytes total (766115840 bytes free)If I were to try to debug the install, what debug mig...

Member Since	‎12-11-2013 06:13 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	15
Total Helpful Votes Received	9

User Statistics

User Activity

How do I assign a variable to a tasks input field?

Exploring UCS Director REST API

Hi Tomas,

Re: How do I assign a variable to a tasks input field?

Re: !!! GETTING STARTED with Cisco IOx

Re: !!! GETTING STARTED with Cisco IOx

Re: !!! GETTING STARTED with Cisco IOx