About campbellkay001

campbellkay001 · 05-24-2015

Hi Guys, we currently have a Cisco 887VA (MPC8300) Just wondering if i can configure a fiber connection on this device, struggling to find a configuration. Fiber is on vlan 10 connected directly to one of the FastEthernet ports, i thought i would cr...

campbellkay001 · 06-02-2014

Hi, I have a Cisco SG300 switch in layer 3 mode. currently have a very cheap router, which only allows me to add 2 static routes back to my layer 3 switch. I have 4 subnets on my SG 300 example VLAN 10 192.168.10.0VLAN 20 192.168.20.0VLAN 30 192.168....

campbellkay001 · 05-27-2015

Hi,I was getting 50Mbps up and down, the fibre is contended so it could vary, when I tested it directly from the ISP modem, I was getting 90Mbps up and down, although this was a few days ago.Generally fine for my client requirements at this point. w...

campbellkay001 · 05-26-2015

Managed to get this all working.Only thing i really had to change was the MTU settings, the dialer keep dropping its connections added these two lines in ip mtu 1452ip tcp adjust-mss 1412 seem to sort it out, thanks for your help

campbellkay001 · 05-25-2015

Thank you Mark will test this out this afternoon and let you know if this works. Looks hopeful though, yeah i can sort out the NAT side of it.

Member Since	‎06-02-2014 02:43 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	5

User Statistics

User Activity

Cisco 887VA Fibre configuration

Inter-Vlan Routing to the internet

Hi,I was getting 50Mbps up

Managed to get this all

Thank you Mark will test this