About Bruno Dinis

Bruno Dinis · 12-12-2022

Hi all.during AireOS days, we can see all APs with the number of clients connected.Nowadays that doesn't seem to be possible...in the Monitoring / Wireless / Clients - only shows where do I have clients, this is not the intentionin the Configuration ...

Bruno Dinis · 06-08-2021

I have one single location where the users are complaining about wi-fi..They say Wi-Fi goes up and down, they flip flop between -256dBm (Very Low) and -57 (Excelent)end devices are mainly DELL laptops managed centrally. I tried to debug one of the cl...

Bruno Dinis · 06-01-2021

Hi everyone.for a while, I've been facing an odd behavior in some APs.I have WLC 5520 (8.5.161.0) configured in N+1 and around 350 APs.The VPN concentrators are ASA 5545's.DHCP is an Infoblox (same subnet as the mgmt of the WLC). They are in the same...

Bruno Dinis · 01-03-2020

Hello.on ISE Guest Access, I've setup change of password required after the first login.It works very good. After the 1st login the end user is invited to change it normally. What happen when the end user loses his password, he/she asks for a reset, ...

Bruno Dinis · 06-06-2019

Hello guys.I've got one 5520 WLC with 8.5.140.0 with 154 2800 APs.My Cisco Prime is 3.4.0.0.348 build. I have enough licenses for these equipment. Problem: In Cisco Prime only 134 Aps are shown. they are all on the same controller and have the same ...

Bruno Dinis · 12-13-2022

Leo, this is exactly what I was looking for!Perfect!expecting this view to be available on the GUI soonBEst Regards

Bruno Dinis · 12-12-2022

Scott, thanks for sharing your thoughts. I found the dashlet option earlier, but I have to constantly go back to the home page, and filter the TOP Access Points, and Sort by AP's with Lowest Client Count... and again... limited to the 10 lowest clien...

Bruno Dinis · 06-10-2021

Much appreciated your help.I changed the following in the Wireless LAN Card Settings1. Advanced/Preferred Band (Prefer 5ghz band) 2. Power Management/ (Do Not) Allow the computer to turn off this device to save power. the connection is more stable no...

Bruno Dinis · 01-03-2020

that is checked!As I said in the thread, initially the user gets prompted to change the password. But if he forgets, the admin resets the password, and then the user is not prompted to change it again.

Bruno Dinis · 01-03-2020

Jason, I'm administrating the Sponsor Portal.A user tells me that he forgot the password.I go to the Sponsor Portal, and I reset the password. Then I give to him the new password, something like "4#sxSRszk"if the user wants to change the password, ho...

Member Since	‎10-07-2011 01:25 AM
Date Last Visited	‎12-14-2022 01:41 AM
Posts	135
Total Helpful Votes Received	21

User Statistics

User Activity

9800 show APs with zero clients

AnyConnect inconsistant RSSI

loose VPN connection in random offices

ISE | change password after reset

LAP not showing on Cisco Prime

Re: 9800 show APs with zero clients

Re: 9800 show APs with zero clients

Re: AnyConnect inconsistant RSSI

Re: ISE | change password after reset

Re: ISE | change password after reset