About k.scholtens

k.scholtens · 12-07-2016

More than occasionally I have a problem with what I can best describe as an out-of-sync issue. When I select the my connected 7975G phone (connected to a ISR 2901 with CME) on the W740 base, then hit the headset button on the 7975G base, it will beg...

k.scholtens · 03-02-2015

My set up is an ISR 2901 with CME 10.5 with Viatalk Outgoing calls are working as expected. Incoming calls receive a busy signal. Further to this, there is no traffic to the interface. The voip ports are in fact opened to the world, so I know fir...

k.scholtens · 02-28-2015

Hi Experts - admittedly my ISR 2901 V02 and Call Manager Express isn't fully configured yet, but it at least does dial out ok (no dial in). This is not the reason for this post (though feel free to comment on inbound calling over viatalk). My proble...

k.scholtens · 08-31-2016

Hi Aaron - did you manage to get this going? Would you be willing to share you full debug for Outgoing calls with skype connect? I'm struggling to see how the full header should be correctly presented to skype. Thanks

k.scholtens · 08-25-2016

Would you mind sharing your redacted configuration? I've been struggling trying to get either method to work with Skype Connect. It's quite frustrating. Thank you.

k.scholtens · 03-03-2015

Hi Terry - ok, that is a good observation. With that in mind, how should the ACLs be applied for CME?. My assumption was everything should be on the egress interface. Can you please review my NAT configuration to ensure it looks correct (besides t...

k.scholtens · 03-02-2015

Also, sorry if I didn't make it clear, I did try enabling debug for the inbound calls and nothing is logged. I think I even tried an interface dump during ACL builds and no traffic even attempts to try to get to the router from viatalk.

k.scholtens · 03-02-2015

Hi Terry - The 925XXXXXXX was placing a call to 925XXXXXXX. These outbound calls work. The inbound calls to 925XXXXXXX, do not. That is the one getting the busy signal. Thanks for your help. 010285: .Mar 2 22:12:12.589: //-1/1107607B829B/CCAPI/cc_a...

Member Since	‎06-15-2014 11:27 PM
Date Last Visited	‎08-24-2018 02:02 AM
Posts	13

User Statistics

User Activity

Problem with 7975G, Plantronics W740 Savi and APC-41 cable

Incoming calls - busy signal - Viatalk

Problems with voice recognition systems

Hi Aaron - did you manage to

Would you mind sharing your

Hi Terry - ok, that is a good

Also, sorry if I didn't make

Hi Terry -The 925XXXXXXX was