Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to get the USB 4g failover feature working on an RV130 using a Huawei E8372h-153 which is on the list of supported modems. The router recognises that there is a Huawei dongle connected but just says status unknown, and I cannot connect or ...
On our RV130w, under QOS, I enabled Bandwidth Management in order to create a service rule to prioritise VOIP traffic. However, I've noticed that when I do that, the WAN bandwidth is reduced to the internal ports. It seems to be dividing it equally a...
I need to get the MAC address of the WAN port on our RV130 for our ISP. The only thing I can find in the admin interface is under Network Settings > MAC Address Clone. If you don't enable the clone option, there is a greyed-out MAC address displayed ...
I set up a single port forward on this router for UDP only and a couple of times it has stopped accepting connections. It seems like somehow it has got "jammed", because if I change the public port number on the rule, it starts working again on the n...
I'm wondering if anyone knows if the Vodafone K5161 or HUAWEI Balong B711 4G dongles will work in either the RV130 or RV320 routers? There are some Vodafone/Huawei dongles listed in the support documents but not those particular models.Thanks
Actually I have now been able to check the label on the router, and it corresponds, so the MAC address showing in the clone option is indeed the default MAC address for the WAN port.
What was confusing me is that there are basically 2 related screens which on many routers are only one. If you want to forward a single port and maybe translate it as well, use the port forwarding screen. If you want to forward a range, use access ru...
