About SJNIII

SJNIII · 05-10-2023

We are running CML 2.5 Enterprise.I have downloaded project topologies before, but for some reason, it is not working today.I first select the NODES options and select the nodes, and then EXTRACT CONFIGS (don't see a pop up box to save them, don't re...

SJNIII · 03-01-2023

What would be the best IOS to use to model a4331 router 3945 routerThanks

SJNIII · 02-16-2022

We are looking at purchasing 4 to 5 CML Personal Editions to use in our VMware Lab. The Lab is air-gapped with no internet access. Can I build the CML VMs on an ESXi host that has internet access, activate / register the product, then export the VM...

SJNIII · 01-06-2022

We are setting up a test environment in vSphere that will use VMs and need to emulate customer’s physical switches and routers.We have CML running on an ESXi Server.As a first test, a customer has provided us with a 3850 fiber switch configuration fi...

SJNIII · 01-31-2019

We are looking to test some Cisco switch and router configurations for a customer by using GNS3. I am not an expert in CML or CISCO devices in general. The customer sent us a set of .tpl files and bin files. I think what we need is the actual s...

SJNIII · 05-17-2023

I think it may be the Chrome version. I upgraded to CML 2.5 and was running an older version of Chrome. I tried to access the Cockpit from another VM running a newer version of Chrome and it works

SJNIII · 03-07-2023

They are not images in CML. I found out from a Cisco employee that the 4300 series ISR router can be emulated with the CSR1000v (or Cat8Kv) in CML. The 3900 ISR can be modeled with the IOSv node

SJNIII · 02-16-2022

Thanks. Follow-up QuestionOnce the VM is moved to to our air-gapped ESXi host and powered on, will the VM ever need to connect to internet again ? I read on another forum that the CML VM can be disconnect for up to 7 days until you're required to re-...

SJNIII · 01-10-2022

This sounds like we have no options with any commercial or free software to emulate the 3850? We have to get a real 3850 to do this testing?Which may be difficult to get approves to add to our environment.

SJNIII · 02-20-2017

Thanks I have to first check if ssh is enabled. I was told that it was already set. I am also asking if the commands I show in my original post should be executed to an Ip address on the switch because of the OOB IP being set to an Ip address in our...

Member Since	‎06-17-2014 08:31 AM
Date Last Visited	‎05-24-2023 04:47 AM
Posts	28
Total Helpful Votes Received	2

User Statistics

User Activity

Can't download a CML topology

Best IOS to use in CML to model routers?

Build CML VM and Activate and then Import to ESXi ?

CML - need to emulate a 3850 fiber sw

Cisco switch and router configurations and .tpl files

Re: Can't download a CML topology

Re: Best IOS to use in CML to model routers?

Re: Build CML VM and Activate and then Import to ESXi ?

Re: CML - need to emulate a 3850 fiber sw

Thanks