Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I just added vlan 777 for management but I can't access it via SSH, and I can't ping it. See attached configs of the core and the problematic switch. HDQ is the problem switch. DtnCore is the core switch that the HDQ switch connects to for WAN uplink...
I have a stack of two 3850's configured with an int vlan 17 and we access that switch via an IP on that vlan. However, I configured a new vlan 777, and with that new vlan I can ping out but can't ping it from outside other networks/subnets/devices. T...
Hello,
I need to upgrade my WS-C4507R-E (Supervisor V) from IOS 12.2(54)SG1, ROM 12.2(31r)SGA1, to 15.0(2)SG10. The question is, can I do a jump without installing other versions and what are the system requirements? Please help. Thanks.
Yes, eigrp stub connected summary is part of the configuration of every (switch) in the network. I need to create a configuration window so that I can remove the command from the Core. I'll let you know how it went. Probably next week.
Here is the show ip eigrp topology on the Core:SCPL_DtnCore#sh ip eigrp topologyEIGRP-IPv4 Topology Table for AS(700)/ID(1.1.1.14)Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,r - reply Status, s - sia StatusP 10.192.240.0/30, 1 su...
That didn't work. This is what it looks like now SCPL_HDQ_3850#sh run | be eigrprouter eigrp 700network 10.195.253.0 0.0.0.3network 10.253.10.0 0.0.0.255network 10.253.33.0 0.0.0.255network 10.253.212.0 0.0.0.255network 10.254.200.0 0.0.0.15network 1...
