About _Ratha_

_Ratha_ · 01-06-2019

%ASA-4-733100: [ x.x.x.x] drop rate-1 exceeded. Current burst rate is 9 per second, max configured rate is 10; Current average rate is 17 per second, max configured rate is 5; Cumulative total count is 20831 Can someone explain me what is the meaning...

_Ratha_ · 11-01-2018

How can I show log or get log file from Cisco Switch during hanging? Thanks, Ratha.

_Ratha_ · 09-20-2018

There are several users with administrator role on network devices. sometime configuration change without acknowledgement. I want to know who have been log in and what they have made change. How to monitor this activity on cisco ASA, switch or rout...

_Ratha_ · 03-27-2018

Based on Diagram above: Client computer accessing server with public IP address 2.2.2.10 through ISP2. I need the return traffic much be back with ISP2, but default AD to ISP1 is lower. How to manage traffic to return to Client with origin ISP? ...

_Ratha_ · 02-11-2018

Dear all, I am trying to configure rspan on cisco 2960. vlan 380remote-spanmonitor session 10 source interface Gi1/0/3monitor session 10 destination remote vlan 380 After I applied this commend, I cannot ping to server connect to port Gi1/0/3 a...

_Ratha_ · 03-29-2018

Static default ad to isp1 =1 and static default route to ISP2 = 2.

_Ratha_ · 03-27-2018

Static default route is configured to both ISPs which default route will go through ISP1 is lower than static default to ISP2.

_Ratha_ · 03-27-2018

VLAN that configure SPAN won't accept data traffic any more.

_Ratha_ · 03-27-2018

Assuming that web server 192.168.1.10 configure static NAT to IP 1.1.1.10(ISP1's IP) and 2.2.2.10(ISP2's IP). I need clients from internet with IP 5.5.5.5 access to web server by 1.1.1.10 via ISP1 will return traffic by ISP1, then again client 5.5.5....

_Ratha_ · 03-27-2018

Based on this configuration, even traffic from ISP1 also return via ISP2. How to make traffic from ISP1 return via ISP1 and traffic from ISP2 return via ISP2?

Member Since	‎06-28-2014 07:25 AM
Date Last Visited	‎01-09-2019 12:05 AM
Posts	55

User Statistics

User Activity

Log analysis

hang device logging.

Audit log on cisco ASA firewall.

Manage PBR for return traffic to clients.

VLAN down while I configure RSPAN

Re: Manage PBR for return traffic to clients.

Re: Manage PBR for return traffic to clients.

Re: VLAN down while I configure RSPAN

Re: Manage PBR for return traffic to clients.

Re: Manage PBR for return traffic to clients.