Hi Aleksandar,
ORIGINAL configuration before applying “queue-limit 8000 kbytes “
policy-map MPLS_OUTPUT_QOS
class exp5
priority level 1
!
class exp3
bandwidth remaining percent 30
random-detect default
!
class exp2
bandwidt...
Thanks Aleksandar for your quick response.I went through the slides.we know that when defining WFQ without shaping or policing,bandwidth gets allocated dynamically to classes each that can go above their limits if bandwidth available.However we are...
Hi Alexander,
Let me reword my problem as the issue was not apparently with WRED.we were having egress queue drops in class-default on a 1Gig link.Even though RED/WRED was removed off the class-default where all our the customer traffic falls in.Howe...
Hi Xander,we have egress policy map towards the remote PE with RED enabled to default-class on our PE.Given the egress traffic gets MPLS labels( like Pseudo-wire ) and only labelled traffic with EXP value is visible to the router (we set Exp to z...