Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
zerorange
Level 1
Level 1
Member since ‎07-10-2014
‎09-19-2018
Recent Badges
Awards

User Statistics

  • 8 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Certifications
Cisco Certified Network Associate Security (CCNA Security)
Cisco Certified Design Professional (CCDP)
Cisco Certified Design Associate (CCDA)
Cisco Certified Network Professional Routing and Switching (CCNP Routing and Switching)
Cisco Certified Network Associate Routing and Switching (CCNA Routing and Switching)
Cisco Certified Design Professional (CCDP)
Cisco Certified Design Professional (CCDP)
Cisco Certified Network Professional Routing and Switching (CCNP Routing and Switching)
Cisco Certified Network Professional Routing and Switching (CCNP Routing and Switching)
Cisco Certified Design Associate (CCDA)
Cisco Certified Design Associate (CCDA)
Cisco Certified Network Associate Security (CCNA Security)
Cisco Certified Network Associate Security (CCNA Security)
Cisco Certified Network Associate Routing and Switching (CCNA Routing and Switching)
Cisco Certified Network Associate Routing and Switching (CCNA Routing and Switching)

User Activity

Multicast delivery with OTV

11-23-2015
Hi, We have a problem with multicast traffic over OTV (data plane).There is multicast source on site A in VLAN 10, also there're a few multicast receivers in the same vlan on site B.VLAN is stretched between sites with OTV. So I've configured IGMP q...

OTV route dampening

09-04-2015
Greetings, everyone.   I have a problem with OTV on N77k platform. Some MAC addresses that are advertised via overlay interface are dampened in receiving side.   This is how it looks like:   acme-core-otv# show otv route OTV Unicast MAC Routing ...

Nexus 7700 supervisor switchover upon mgmt0 link failure

01-12-2015
Hello, We have 7700 chassis with two supervisors which are connected to OOB management network with mgmt0 interfaces.The issue is that if there is a failure of management switch's interface (the one active sup is connected to), standby sup won't take...

Directly connect two N7700 via 100Gb link

10-24-2014
Hello, We are using N7700 chassis with 100G line cards (N77-F312CK-26).Transceivers are 100GBASE-SR10 (link). I'm wondering if it's possible to directly connect two chassis using some 24-fiber MPO cable, e.g. this one. My most concern is about polari...

C3850-NM-4-10G uplink module

07-10-2014
Hello, I was wondering if the uplink module C3850-NM-4-10G is able to work in non-blocking mode.We're planning to configure two port-channels (20 Gbps each) and switch packets between them. Could anyone confirm the ports on the module would work in n...
Community Statistics
Member Since ‎07-10-2014 12:09 AM
Date Last Visited ‎09-19-2018 03:50 AM
Posts 8