About LJ Gabrillo

LJ Gabrillo · 04-26-2016

Hi Everyone, Just a bit of backgroundAs a lot of us know, the 5506 has a built-in Management for its firepower module using ASDM.However, the admin has the option to use an external FirePOWER managemnt center if so desired.One of our clients, has a ...

LJ Gabrillo · 04-01-2016

Hi Guys, I cannot seem to find any guide anywhere but how do you change the 'admin' password NOT the registration password for the ASA SFR Module?

LJ Gabrillo · 03-21-2016

Hi Everyone,So, have a new ASA 5506-X here fresh from the box, but the current version is 5.3.1 Considering it has a built-in FireSIGHT management Center, So how do I do it?

LJ Gabrillo · 03-15-2016

Hi Everyone,Asking for your help again, first of, I already read a ton of guide on how to initial setup i.e., prime the FirePOWER module so that's covered. Recently, one of our clients purchased a new ASA with FirePOWER services, all is well and good...

LJ Gabrillo · 03-14-2016

Well, how do you reset to factory default the FirePOWER module in ASAThanks! :D

LJ Gabrillo · 05-27-2021

From the looks of your screenshots, it seems you are either using a:1. Tablet2. A Monitor with a square aspect ratio (old era monitors) Use a laptop/modern monitor with a modern browser such as Chrome, Edge or Firefox Did my post help you? Consider m...

LJ Gabrillo · 05-27-2021

What is your goal in selecting multiple interfaces? As far as I know you CANNOT select multiple interfaces on the interfaces view when configuring stuff in the Web GUI

LJ Gabrillo · 05-27-2021

@Martin L wrote: Router-PT and empty Router in packet tracer is using 12.x IOS so it may not be best option. PT also does not support all features and does not behave like real IOS. You can do IPSec in PT, but most likely not all options are availa...

LJ Gabrillo · 05-27-2021

Hi @masiyus if you are using Active Directory Azure(SaaS) you may need additional configuration on the Azure side. Sadly, I'm not an expert regarding this but hopefully this guide will be able to help you If my post helped you, consider marking it as...

LJ Gabrillo · 05-26-2021

If understand your question correctly. Your setup is like:[R1]---[R2]---[R3] --R1 has a Site-to-Site connection to R3--R2 is just a middle router, just routing/connecting R1 and R3's WAN interfaces In terms of feature support:R2 does NOT require IPSe...

Member Since	‎07-17-2014 11:23 PM
Date Last Visited	‎06-28-2022 06:58 AM
Posts	569
Total Helpful Votes Received	338

User Statistics

User Activity

ASA 5506 with Firepower Managing Device: From ASDM Built-in to External FireSIGHT

Change Password of FirePOWER module in ASA

Upgrading the built-in FireSIGHT in ASA5506-X

Intial Setup for FirePOWER module, where to start

Resetting to Factory Default FirePOWER Module in ASA

Re: Cisco Aironet 1850

Re: C3650 WebUI : How to select an interface range

Re: VPN/IPsec router support in Packet Tracer

Re: Integrated WLC with LDAP Azure

Re: VPN/IPsec router support in Packet Tracer