mwhite1983
Level 1
Level 1
Member since ‎07-18-2014
‎09-05-2018

User Statistics

  • 6 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

After configuring "auto qos voip cisco-phone" on a stack of 2960x switches, we later noticed that after a power cycle (config was saved first) it went missing when doing a "show run" from the interface configs, on one of the switches (g1/0/1-48 had i...
Hello,I have a new stack of five 2960X's and recently started to configure the stack, and found the "power inline auto max 15400" on my 3rd switch in the stack.  I did a "show power inline" and confirmed it set the max to 15.4 instead of the default ...
Hello,A few questions regarding setting the root bridge...What is the Cisco recommended way to set the root bridge for several vlans?In our environment we will be deploying a collapsed core design with a stack of 4500X switches.  The access layer wil...
Hello, We are attempting to port-channel on 4500X trunk interfaces with Auto QoS and encountered the following errors as described here: http://blog.lah.io/2013/10/cisco-catalyst-4500-x-etherchannel-auto.html): 4500X(config)#int range te1/15-16 450...
Hello -I am configuring an interface on a 3650 switch for a device that is being moved from a 3550 switch.  I found that some commands that were configured on the 3550 interface are not available on the 3650: mls qos trust device cisco-phone mls qos ...
Community Statistics
Member Since ‎07-18-2014 08:33 AM
Date Last Visited ‎09-05-2018 04:05 PM
Posts 6