hi, I am in need of an explanation of the NAT concept. I have a single public IP address and I am trying to set up cameras over the internet. Do I open ports per camera (and how) or is the following command sufficient. (config)#access-list 1 permit 10.10.0 0.0.0.255 (config)# ip nat inside source list 1 pool IPCAM overload (config)# ip nat pool IPCAM 188.8.131.52 184.108.40.206 netmask 0.0.0.255 where 220.127.116.11 is my only public address and 10.10.1.0/24 is the internal network nat inside interface=10.10.10.1 nat outside interface=18.104.22.168 Thanks!!
... View more