mudasir05

yes i have....pls chk the below lines of config: access-list HTTPTRAFFIC extended permit tcp any hos...

Hello, u mean whole configuration of the ASA or just the below one? CiscoASA# sh run policy-map !pol...

Hello All, I have configured service policy rules on my ASA 5545 : policy-map CONNS class AttackingT...

Stats: CiscoASA# show threat-detection rate scanning-threat Average(eps) Current(eps) Trigger Total ...

Thanks for the reply, In our case we have a Web Server and the number of Active Users accessing the ...

Hello All, We have Cisco ASA in production environment on which i see the connection count more than...

please note i am using Static NAT both on ASA and on Router. This i guess will do bidirectional natt...

Hello Marius, I am doing NAT both on my ASA as wel as on the internet facing router. Also i see exte...

Hello Marius, Sorry to say can't post whole config as this is our production firewall... let me know...

Hello, This is already done by me.....i allowed the subnet as well in the access-list. Still dont kn...

Hello All,Do i need to configure this on ASA?Also let me know use of the Service host command? Thank...

i can however access the IPS from the command line via ASA using session command. from IPS i cannot ...

Hello, I configured the IPS with the same ip address as on the inside range and connected the manage...

Hello All,I have a Cisco Router connected to two ISPs and behind that I have a Cisco ASA connected t...