Hello All, I am attempting to set up OpenVPN server instead my network because the cisco QuickVPN bundled with the SA520 appliance does not seem to work well. I have configured my OpenVPN server and client, but when I attempt to connect using the client the firewall drops my connection.I have set up an IPv4 firewall rule in the SA520 for the specific ports and IP addresses, but no matter what I do the SA520 drops the packets. I have tried using different port numbers and both TCP/UDP.I have another firewall rule set up for a web portal that works perfectly fine. Dropped even log, Firewall Rule, Service Info Thu Dec 4 13:32:13 2014(GMT -0500) WARN FIREWALL *Remote IP* *Router IP* [firewall] LOG_PACKET[DROP] IN=WAN OUT=SELF SRC=*Remote IP* DST=*Router IP* PROTO=UDP SPT=52392 DPT=1194 Component: KERNEL If anyone has any thoughts it would be appreciated.
... View more
I have an environment that uses several RVS4000 series routers and would like to set up a syslog server to get and store log information for these devices. I have a syslog server set up, and I am receiving information from another device (RV320); but when I set the IP address in the firmware of the RVS4000 I do not get anything on the syslog server. I ran wireshark and I am not seeing anything at all from the RVS4000's IP address. Both the RVS4000's and the RV320 are connected via VPN tunnels to a central network where the syslog server resides. I currently have the latest firmware on the RVS4000's. Any help or recommendations is appreciated.
... View more