Hallo Juergen Fischer,
i just wanted to take the opportunity to tell you about NeDi.
From the nedi.ch website:
FEATURES:
DISCOVER
Discover your network and find every end-node connected to it. Visualise the topology to get the big picture and find ...
Hi radim0754,would you mind uploading a screenshot of the topology? This should be more easy than downloading the whole GNS3 Project.After only reading the text, i would guess that each VLAN interface on the DSW (Distribution Layer Switch?) has confi...
Hi brabhaharan, If your topology looks something like this:[Switchport of ADSL] -> [Straight-Cable] -> [Patch-Panel] -> [ xxx ] -> [PC] xxx has to be a straight through cable. Crossover-Cabels are only intented to be used in one of the following scen...
Hi!You sure can do that, but it will only work, if your PC is capeable of working with IEEE 802.1q trunks.The fact that you are able to Ping the PC in VLAN1 and not an VLAN2 is because of the native-vlan configuration of the Switch, which should be b...