Hello All,I want to configure a Cisco 3650 which will have to be connected directly to another big switch (don't know the model) that is already configured. This 3650 will only be used to further provide the LAN connection to a few Cisco IP phones (a...
Hi There!I want to configure a Cisco 3650 which will have to be connected directly with ISP and it's ports' will be used to distribute network among Cisco IP phones, few systems and several Aruba WAPs. I'm still learning and not aware of the proper c...
Hi All,I have taken the CCNP Switching exam on 05 October, 2015 but I have not received the certificate or any supporting document at my address till now. Please let me know what needs to be done. Thanks,Raghav
Hi All,My organization's network engineer has asked me to find out the port number which is connected to GigabitEthernet 3/0/2 & GigabitEthernet 4/0/9 respectively. I don't know out of 48 port on switch in our data center which one are these two (bot...
Hi All,Please let me know which UPS I can setup for my Cisco Router 2811. This router will be installed lone at a corporate apartment for Internet connectivity between two different floors. So just in case of a power outage I don't want to damage the...
Hi There,Thanks for your great help! Below is the final template which my NE provided me:Now I have to configure this router and then further need to connect various workstations with the same network. Please let me know what needs to be done further...
I have confirmed from him and we just need to set default route and NAT on it. And we only have to connect that router with ISP and not with our office. And I have to decide the LAN side ip address. Now help!
