Hi Shankar, Thanks for putting this together. The tool does not seems to work when I tried to convert from AireOS to catalyst 9800 using either show run-config startup-commandsorshow run-config commandsfrom a 5508 controller running 8.5.176 versionCo...

Thanks Reza, i had same issue with Cisco 887VA router rebooting the router and repeating the command workedThanks H

Hi Martin,   I have gathered the release date for 8.3MR4 will be end of January 2018   Thanks H

Cisco TAC have advised this is a cosmetic bug which will be fix in yet to be released versions 3.6.6E and 3.7.5E. But for now a reload of the stack is a temporary fix as cpu will creep again after few months. Cosmetic bug id is CSCuz57493 - High CPU...

Hello Tim, In Flex connect mode the AP will only contimue to forward local traffic when local switching is enabled for the SSID Please confirm if this is enabled under: WLC > WLAN > click on the ssid > Advance >> scroll down FlexConnect Local switc...