About chennai.itsupport

chennai.itsupport · 01-22-2015

Hi Team,Can you let me know how to enable LACP on cisco 2951 Version 15.2(4)M7Below is my config:Router:interface Port-channel1.1 description DEVICES$FW_INSIDE$$ETH-LAN$ encapsulation dot1Q 1 native ip address 1.1.1.1 255.255.255.0 no ip redirects no...

chennai.itsupport · 10-30-2014

Hi Team,I have a doubt .....In our office we have 4 access point .... and as wifi users increases we are planning to create 4 VLAN and each VLANhave one AP .. but the problem is When wifi users roam from one AP to another AP i,e from one vlan to anot...

chennai.itsupport · 10-28-2014

Hi Team,We have one ISR2951 with LAN: 192.168.1.1 (dhcp server enable - 192.168.1.10 - 192.168.1.250)And Cisco SG300 switch withVLAN1 (default) 192.168.1.254VLAN10 192.168.10.254VLAN20 192.168.20.254VLAN30 192.168.30.254i made it in such a way that P...

chennai.itsupport · 09-07-2014

Hi,We have Cisco 2951 router. And every one in office are using skype for calls,video conferencing and for file transfer. And we have one VLAN1 and around 200 people will be using internet at a time (ISP= 45Mbps Lease Line).When we do file transfer o...

chennai.itsupport · 01-22-2015

Hi Reuben,Thank you .... well that is sad based on the price of ISR ... i was thinking if i can enable lacp on the ISR i can have the same settings on the HP switch for our router and firewall. And if any one goes down ... i can just manually connect...

chennai.itsupport · 01-22-2015

in other words how do i enable lacp on cisco 2951 router

chennai.itsupport · 10-30-2014

For now i believe associating VLAN with the SSID should work...i did ran through cisco ip mobility doc.....

chennai.itsupport · 10-29-2014

Thank you danjone3 .. the reason i ask is mainly due to ip roaming ...We have 4 access point and i want each access point to have their own VLAN ... but when we put it that way .... wifi user when they roam from one AP to other their connection is r...

chennai.itsupport · 10-29-2014

Thank you Rick for all the help.... now i get DHCP from the router and get internet to all the VLANs... :-)One more doubt though:how can i make the router to give out DHCP Scope : 192.168.1.0 to all the VLANs irrespective of the VLAN interface ip.......

Member Since	‎09-07-2014 11:40 PM
Date Last Visited	‎08-18-2017 04:02 AM
Posts	15

User Statistics

User Activity

LACP on ISR 2951 ... Layer2 Port Channel

Dynamic VLAN for wireless

One Router Single Switch Multiple VLan

skype file transfer exceedingly slow over WAN as well as on LAN

Hi Reuben,Thank you .... well

in other words how do i

For now i believe associating

Thank you danjone3 .. the

Thank you Rick for all the