About dlhenning

dlhenning · ‎06-23-2015

That did the trick. Now if the UC will hold the change we'll be fixed. Thank you very much.

dlhenning · ‎06-08-2015

I don't have a setup button or a start button on our phones that I can tell. I can get to the SPA through the web interface but that is it. The PMF files don't address setting the date/time. Any suggestions.

dlhenning · ‎06-08-2015

I'm having a similar issue with accessing the SPA504g phone, specifically being denied access to the admin login. The PMF files don't address setting the date/time. I need to be able to set the date/time through the SPA, at least that is what I've read. There isn't a place to do that through the UC320w that I can find. Any suggestions

dlhenning · ‎06-08-2015

I have a UC320w with SPA504G handsets. I've been trying to reset the date and time and have been unable to do so. I have access the my UC and access to the handset but am still unable to set the date and time. I read during my research on this, that the date/time are preset at the factory and that it should be possible to reset that through the SPA. When I try to log into admin login on the SPA, I get forbidden access. It shouldn't be that hard but apparently it is. Is there a way to upload that info from either the UC or the SPA? If this is the wrong board to post this on please let me know. Any help will greatly appreciated.

Date Registered	‎09-11-2014 06:37 AM
Date Last Visited	‎08-18-2017 04:02 AM
Total Messages Posted	4

That did the trick. Now if

I don't have a setup button

I'm having a similar issue

Reset Time/Date on UC320W