About apicguy

apicguy · 03-30-2017

Hello According to this document, a new C800 router will send DHCP discover packets out of all attached LAN interfaces to determine if a DHCP server is available. I have tried several Cisco routers in the 800 series. No DHCP discover is seen. Only C...

apicguy · 11-09-2018

ctrl+c during boot.

apicguy · 09-12-2018

Correct. The IR series do bundle install and upgrade hypervisor as well. Things is getting close to put the APIC-EM into production. With newer IOS I'm stuck in "Failed health check since device is stuck in non-terminal state FILESYSTEM_INFO_REQUE...

apicguy · 08-15-2018

Same issue for me (IR800 series). APIC-EM Version 1.6.2.30018.PnP - Version 1.6.2.102

apicguy · 08-15-2018

Thanks for the prompt reply. I'll add the hostname issue to my already configured self destructing EEM script event manager applet POST_PNP_IR809event timer countdown time 20action 0.1 cli command "enable"action 0.2 cli command "cellular 0 lte profil...

apicguy · 08-15-2018

Hi Adam. We are going to use the plug-and-play module for APIC EM for thousand of routers. When using a hostname with 16 characters or more, the provisioned device goes into ERROR stage with the output below: % Hostname "189228-TEST123456 " is no...

Member Since	‎09-26-2014 04:45 AM
Date Last Visited	‎04-05-2024 12:24 AM
Posts	6

User Statistics

User Activity

AutoInstall Using DHCP for LAN Interfaces

Re: IR829 Console open

Re: DNA Center Plug and Play (PnP)– Part 1

Re: APIC-EM reloading router after deploying config

Re: DNA Center Plug and Play (PnP)– Part 1

Re: DNA Center Plug and Play (PnP)– Part 1