About JtulleUT79

JtulleUT79 · 10-13-2014

I know several similar questions have been asked on this topic, but following the guidelines had no success for me. I have created the VLANs with the SG300-10 in L3 mode, but clients in each VLAN aren't able to ping each other. Each VLAN can ping the...

JtulleUT79 · 10-15-2014

Bingo! we have a winner :DI suspected it might have been the client's firewall since i was able to ping some other devices (VOIP phone, music speaker) that were in the VLANs. So i updated my firewall to allow my VLAN subnets as seen here (http://www...

JtulleUT79 · 10-14-2014

For the VLAN devices , i setup Network Pools with the switch as the DHCP Server. for example VLAN 3 ip dhcp pool network VLan 3address low 192.168.3.2 high 192.168.3.254 255.255.255.0 lease infinitedefault-router 192.168.3.1dns-server 8.8.8.8exitI ve...

Member Since	‎10-13-2014 03:47 PM
Date Last Visited	‎10-09-2017 11:51 AM
Posts	3

User Statistics

User Activity

SG300-10 & Actiontec M1424WR (Rev E) InterVLAN Routing Issue

Bingo! we have a winner :DI

For the VLAN devices , i