Hi,I've a chassis config for a service provides that use MPLS.the question is: When do I need to use different kind of CFC,DFC and memory quantity for my modules ??The chassis config is:Cat 6509 NEBS Chassis for all Supervisors,No PS,No Fan 1 Unc...
Hi,we have:(vrf1) ce1--pe1--(bgp_mpls)--pe2--(ospf)--ce2 (vrf2)only pe2 generate the default for ce2 and for ce1 (trough pe1 that made a redistridution on default)ce1 and ce2 must see ONLY default route.The problem is on pe2. Pe2 generate the default...
Hi,I've 2 router with peer DLSW between 2 lan.I need that netbios hosts can communicate using DLSW.I've some offices that are working fine with the attached conf.You can see that the NETBIOS reachability cache list is empty !!! on one side. I don't k...
Hi,after reset my msfc card (module 15) the card don't boot.After changing IOS and boot image the MSFC don't boot and on supervisor I don't see "ok" but I see "other": 15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no other Using the command "switch c...
Hi,I've one router 7200 with 12.3(5b) EnterpriseI'm using VRF lite for 2 customer (A and B)customer A have eigrp (static to B)customer B have static (default route to A)SRV1---customerA---7200----customerB---PCI don't known why PC can't ping SRV1!ip...
Hi,I found this problem:The real problem is related on BGP. The BGP don't work correctly because we don't see bgp routes inside VRF but only inside bgp table (show ip bgp vpnv4 all) !!!After every reload the bgp table isn't populated correctly (route...
Hi,I fond the problem !!!After command "clear int gi0/3" the vrf-lite feature and bgp process stop run; so I can't see bgp routes redistributed into VRFs A and B.I due:no ip cef and after I lose the vrf's configuration only on trunk under giga0/3 but...
Hi,I made.With traceroute from server the stop is the router vrfWith traceroute from pc the stop is the same router vrffollow the conf:!no ip domain lookup!ip vrf B rd 1:9 route-target export 1:4 route-target export 1:9 route-target import 1:4 rou...