Hi all, I'am working on this switch's configuration. when I typed "switchport mode trunk encapsulation dot 1q", I got an error " invavid input". I'm guessing that this model already set encapsulation type to dot 1q, and that's why the switch won't...
I added a STP lab (3 L3 switches) into my exiting Route Redistribution network lab. I assigned trunk ports to appropriate Gig. port to create trunk link between switches. I also issued command: spanning-tree vlan 10(20) to each trunk port. I added...
I added a STP lab (3 L3 switches) into my exiting Route Redistribution network lab. I assigned trunk ports to appropriate Gig. port to create trunk link between switches. I also issued command: spanning-tree vlan 10(20) to each trunk port. I added...
I added this STP network(3 L3 switches) into my exiting Route Redistribution network. I assigned trunk ports to appropriate Gig. port to create trunk link between switches. I also issued command: spanning-tree vlan 10(20) to each trunk port. I adde...
Hi all, I'm building my home lab and having difficutly to get this part of router redistribution work. I can't ping from PC, Server and SW1 to R2's int f0/0, f0/1 and SW2's G0/1. I can't ping from R1 to R2's f0/1, SW2 Vice versa, I can'...
Hi Aaron, your are right. comes to CLI, "? key" should be my best friend. I don't have to remember hundreds of command any more. hehe. Thank you for the tip!Take care
