Hello, I have configured a trunk port on a C9300 stack as follows:interface TenGigabitEthernet3/0/37switchport trunk native vlan 91switchport trunk allowed vlan 2-4,81,91switchport mode trunkno ip igmp snooping tcn floodIt will pass untagged traffic ...

I am attempting to update the iOS version on a C9300 switch, and it does not show boot as a valid option either at:  switch: or switch#:. Switch#?Exec commands:access-profile Apply user-profile to interfaceapp-hosting Application hostingarchive manag...

I have a brand new C9300-48UXM-E.  I am following these directions:Connecting to the SwitchBefore you beginThe bootup script runs the configuration wizard, which prompts you for basic configuration input: (Would you like to enter the initial configur...

I have previously configured the 3750-x switches in my home network using the Cisco Network Assistant Software.   I am upgrading to C9300 family of switches for the home network.   It looks like I need to learn to configure the switches with IOS-XE. ...

If I look at a C9300-48P-E versus a C9300-48P-A.   I have not been able to find anything that details the difference. Please let me know what is different. ThxBryan