About laus3r001

laus3r001 · 11-09-2014

Hi guys,I have a a simple setup:VLAN 20 = basic users (192.168.20.0/24)VLAN 30 = admin vlan (192.168.30.0/24) I want to use ACLs to grant/deny access to the different vlans. Basically admins are allowed to access all services in the client network, i...

man, u definitely saved my · 11-10-2014

man, u definitely saved my day....ah, my whole month!!! :-)at least I wasn't so wrong at all...thx very much. highly appreciatedcheers

I give you the whole config, · 11-10-2014

I give you the whole config, just deleted some crypto stuff and unused interfaces. Admin-PC is connected to Gi1/0/2, vlan 30 Client-PC is connected to Gi1/0/4, vlan 20 Current configuration : 7474 bytes ! ! Last configuration change at 09:37:32 ...

actually I was a copy & paste · 11-09-2014

actually I was a copy & paste mistake from me. I checked it and corrected it above accordingly.still no luck though with the debug messages

here's now the real config I · 11-09-2014

here's now the real config I used and applied to the port the basic user is connected to: nucl3us#sh access-lists 120 Extended IP access list 120 10 permit icmp 192.168.20.0 0.0.0.255 any echo-reply 20 permit tcp 192.168.20.0 0.0.0.255 192....

Member Since	‎11-09-2014 04:52 AM
Date Last Visited	‎08-18-2017 04:02 AM
Posts	5

User Statistics

User Activity

ACL to handle admin & user vlans (permit/deny rdp, icmp, smb, etc.)

man, u definitely saved my

I give you the whole config,

actually I was a copy & paste

here's now the real config I