About johanbonvalet1

johanbonvalet1 · 04-28-2016

Hello, I have a cucm 10.5 installed, working fine, with two DX80 registered. We passed from signed certificates to self-signed certificates. The first DX80 registered and the second too. We can not say how, but the second one unregistered from the...

johanbonvalet1 · 04-06-2016

Hello everybody, I have a huge deal: My client has three cucm: one pub and one sub and one preprod We did turn the preprod into mixed-mode by the command line utils ctl set-cluster mixed-mode So we did tje same configuration to the cucm PUB, but th...

johanbonvalet1 · 09-24-2015

Hello, I am new on this system, and I have a little problem about a firmware activation I tried a lot of command lines but nothing happenedThis is the message: Could anyone help me on this? Thank you Regards

johanbonvalet1 · 09-22-2015

Hello, I have a little problem on my SX20 TC7.3.1 with my ISDN Link IL1.1.3. This is the error message i have: Not Sip-Registred to H320 Peripheral. Someone told me it was probably because the SX 20 is in Gatekeeper instead of "direct" and probably S...

johanbonvalet1 · 12-15-2014

Hello Everybody, I have Aa CUCM 10.5 installed, and i need to change the default-language of a DX80 inside my cluster to French,Someon know , how can i do that? Thx in advance

johanbonvalet1 · 04-07-2016

Hello Rob, thank you! yes it was because of one of these bugs! I had disabled these services on the sub: callmanager and to be sure, tftp and ctl provider Then I entered the command utils ctl set-cluster mixed-mode in the PUB and it worked! I go ...

johanbonvalet1 · 04-06-2016

Hello Manish, thank you for your answer, i did not execute this command on the sub, at least i could not. "this CLI is only applicable for PUB" The cluster security mode for the PUB is at "0" and LBM Security Mode to "Insecure"

johanbonvalet1 · 10-09-2015

Hi, Ok, now that's ok, i mapped a virtual device to a dvd driver on my computer, it worked, I made the updates. But i still have the error I don't know why because i made the whole update.. Can anyone help me on that? Thank you

johanbonvalet1 · 10-09-2015

Hi Brandon, I did a bootable usb drive, plugged to my computer and mapping via KVMBut now the issue is: I tried different method of creating a bootable usb drive..I saw this page from cisco https://communities.cisco.com/docs/DOC-56147 but we don't h...

johanbonvalet1 · 10-09-2015

.

Member Since	‎11-17-2014 01:35 AM
Date Last Visited	‎08-18-2017 04:02 AM
Posts	18

User Statistics

User Activity

DX80 No LSC Installed

CUCM PUB does not recognize mixed-mode CLI

UCS C220 M3 Firmware not activated

Not Sip-Registred to H320 Peripheral - SX20 - ISDN Link

Change default language of Ip phone on CUCM 10.5

Hello Rob,

Hello Manish,

Hi, Ok, now that's ok, i

Hi Brandon, Could you help me

Hi Brandon, I don't