Hello,
hope everything is okay with all of you.
just wonder if anyone know the optimum power supply for IE-4000-8GT4G-E
as per the following datasheet
http://www.cisco.com/c/en/us/products/collateral/switches/industrial-ethernet-4000-series-s...
HiI have 3750-X-24T stack with 2 module C3KX-NM-10GT installed in each one , my software code is 15.0.2(SE8) , only single 10G port is working.does anybody faced this problem before , I am sure that I am on the proper code as per cisco recommendation...
Hi ,I am new with dealing with Sourcefire , I have a question to ask , is 5525x platform with sourcefire module version 4.0.2 and Defense center 5.4.1 capable alone to decrypting the SSL traffic ? appreciating your help guys
Hi I just want to ask a simple questionis there any precautions with native vlan between the Switched infrastructure and the Fabric interconnect ?! I mean can I use any vlan as a native vlan ex.999 "anything but not 1" ?!
Hello all I just want to ask question about connected grid service which offer smart meters and it related system and equipment , I can't find a technical specification or SKU for the smart meter or the technical solution . I need some clarification ...
I tried this too , they are running is stack , I managed to remove the stack cables and test this scenario too to make sure both ports will run in 10G speed
Hi Reza , thanks for your response , actually I did this test yesterday and unfortunately there was no positive results , I am using cables (Cat-6a) .to be specificI did the following tests - endpoint 1 is running 10G and connected to port Te1/1/1 o...
