davidhuynh5

Hey guys, I didn't advertise the WAN link between o-hst-cr-re01 and o-sa26-cr-re01 into iBGP...duh. ...

I configured 10.84.18.13 to be a RR client as suggested but still unable to ping 10.84.18.5 from 10....

1- Agreed. I was try to build a full ibgp mesh, hoping that 10.84.18.1 (ASN 64999) could reach 10.84...

Hello, I've setup a iBGP full mesh and configured o-hst-cr-re01 as a route reflector client, but sti...

Sorry, let me rephrase my question. How do I fake a client on my router or layer 3 switch?

We are constantly having DHCP problems on our network. The problem is not with the network tranports...

When I create an acl, then copy/paste it into the router, my 'remarks' don't stay in the same order....

Does any know the command to determine if the PS are in combined or redundant mode on both the 65xx ...

Managing Oversubscription and BandwidthTypical campus networks are designed with oversubscription, a...

On the ASA 5505 and 5510, can you build a point to Multipoint VPN without the need for a GRE router?...

Please review the attachment.Switch1 and Switch2 have the same hardware chasis and modules. Switch1 ...

Sorry, I should elaborate. I want to create vlan 100, then assign e0 to that vlan.I can do it on a 5...

How do you create a vlan? In enable mode, there is no "vlan" command. Thanks.

Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and c...