Texas Hare

Texas Hare · 05-03-2021

There are 5 of same IX5000 systems installed on the customer's site.Recently, We had completed succe...

Texas Hare · 01-05-2021

Thank you for your reply! Have a nice day:)

Texas Hare · 01-05-2021

Hello As far as I know, the IX5000 system has target latency and it is 150 ms.If so, is this based o...

Texas Hare · 12-16-2019

We have been using conductor for making multiparty meeting room.And I'd created the template for pas...

Texas Hare · 09-26-2019

To upgrading software of Roomkit+ device, I had found the software on cisco homepage.But I Couldn't ...

Texas Hare · 09-24-2019

I had installed the Roomkit+ yesterday. All cables connected correctly and I checked the device work...

Texas Hare · 08-26-2019

We have been using Room70D for video conferencing and document sharing. When connect to PC through H...

Texas Hare · 02-15-2019

SX80 Traffic Bandwidth are below from datasheet. Bandwidth ● H.323/SIP up to 6 Mbps point-to-point ●...

Texas Hare · 01-27-2019

Hi I have a probem. i have been using IX5000 system with MIC button. One day, the MIC button works a...

Texas Hare · 01-20-2019

I have a critical issue of using the IX 5000 system. symptoms are below : At first, it seems main di...

Texas Hare · 01-10-2019

I just configured the DX70 with CUCM on my private network for test. And i have a time server IP add...

Texas Hare · 12-25-2018

I have a problem that installation of ix5000.a customer wants know about color code of table color (...

Texas Hare · 07-27-2016

Currently, ASA-A(Center) and B has connected by IPSec VPN. I'd like to establsh VPN connection to AS...

Texas Hare · 07-03-2016

Thanks for reply. I will prepare to OS upgrade.

Texas Hare · 07-03-2016

Hello I have been using the C4507R+E with WS-X45-SUP8-E supervisor. I tried to configure the SSH for...

[IX5000] OS Upgrade Failure