About Jochen Bartl

Jochen Bartl · 01-04-2012

Hi Everyone.I'm in the middle of a Nexus 5000 project and recognized today while configuring port-channels, that some of the interface numbers are reserved for internal use.Is it possible to change or configure which port-channel interface numbers ar...

Jochen Bartl · 08-04-2016

I also had to open a TAC case. They've generated a new license for me. After deleting all the old licenses and installing the new one, the issue was gone.

Jochen Bartl · 08-05-2014

In recent Wireshark releases, the protocol is called "PEEKREMOTE" in the "decode as" menu.Just for reference ;-)Regards,Jochen

Jochen Bartl · 11-29-2013

Upgrading to 7.5 actually fixed this issue. Luckily we haven't had any other issues because of upgrading for now The bridge-group commands are still missing on Gi0 on the MAP, but as long as it is working I don't care.

Jochen Bartl · 11-25-2013

Thanks for your reply Theo. We'll upgrade to 7.5 this evening. I'll post the results here after that.

Jochen Bartl · 11-25-2013

We've upgraded two days ago from 7.2 to 7.4.110.0. After that VLAN trunking wasn't working anymore. Like you described, I only could reach the MAP on the other side via the native VLAN.RAP is a AIR-LAP1262N-E-K9MAP is a AIR-CAP3502I-E-K9After a bit d...

Member Since	‎01-22-2007 11:46 PM
Date Last Visited	‎08-31-2018 01:01 AM
Posts	6
Total Helpful Votes Received	5

User Statistics

User Activity

Change number of internal port-channel on Nexus 5000

I also had to open a TAC case

In recent Wireshark releases,

Bridge Connection

Re: Bridge Connection

Re: Bridge Connection