is it possible in a remote access VPN to give the same IP to a client as they connect and pool the address from th IP pool?I was thinking like a DHCP server where you can tie a mac to an address, is it possible with a pool?
I am transfering files and see PT in progress under the connections. It appears the waas is doing nothing for me.What can I look at to find the source of this problem?
Wanted to see if people have done testing on this. I need to get files accross the US and accross the world. we have some 250ms delay times. Wanted to know what works best using windows file transferbetween SMB or CIFS method.
new to these devices and followed the quick setup guide. having a problem;this is a 2921 router wirh a sm-sre-710 modulebasic config;on the sm-sre-710;wccp tcp-promiscuous service-pair 61 62on the router router;ip wccp 61ip wccp 62interface GigabitE...
I have a G2 router with the sm-700 for remote site and an appliance for the date center.I followed the quick config guide and have it all working. This is using IP's on the interface SM1/0. for the router SMThen I wanted to try it with IP unnumbered ...
No events in window.the asa just responds with "Auth server not responding"I went and setup MS ISA radius auth and have it working. Thought the basic NT auth should work and be easy to setup. I just may go with the ISA server if NT dont work.
