tsabsuavyaj
Level 1
Level 1
Member since ‎10-29-2012
‎10-09-2017

User Statistics

  • 47 Posts
  • 0 Solutions
  • 25 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

Hello,I have a 891 router with FastEthernet0 - 7 being layer 2 and FastEthernet8 & GigabitEthernet0 being layer 3. Is it feasible to configure sub-interfaces or router on a stick on any of the L2 interfaces? If so what's the commands to achieve this?
Hi,I'm fairly new to VoIP and QoS and would like to have a better understanding of my current configuration below, in particular to the policy-map configuration.  By configuring with a priority 240, does this mean that on my T1 line, it is segregatin...
I have a Site-to-Site VPN setup in a lab environment using two ASA5505s.  Site-to-Site VPN is functional however, what I wanted to do is deny all traffic from the Remote LAN and permit only one host to access the local LAN. Is this practical or can i...
I have two ASA5505 ver 8.4(6) and ver 9.0(2) configured for a site-to-site vpn lab, but with no success.  I could ping any outside address from both ASA's, but couldn't ping the LAN on the other end of the ASA.  Below is the error message when trying...
Many whitepapers and training videos on youtube explain how to configure a site to site vpn, but none of them explain how one would configure to force all traffic from the Remote Site to pass through to the Corporate Office to the ASA and out to the ...
Community Statistics
Member Since ‎10-29-2012 11:32 AM
Date Last Visited ‎10-09-2017 12:10 PM
Posts 47
Helpful Votes Given To