Hello guys, On the below topology, I tried to redistribute between OSPF and EIGRP. On CLE1 I redistributed a static route (4.4.4.0) into EIGRP, so DC1 and DC2 see that route as External EIGRP.But after redistribution between OSPF and EIGRP (bidirecti...
Hello everyone,In this topology, we want to redistribute from EIGRP to OSPF on both R1 and R2.67.67.67.67 is already an external route on R4 (AD 170). First, we redistributed on R1 and then on R2.On R1:On R2:As you can see R1 sees the 67.x.x.x.x rout...
Hello. I have an IPsec tunnel acting as a backup path for an internal (EIGRP) link on ASA. It will be triggered only if the internal link goes down and since traffic does not find any EIGRP route then it will be matched with the default route and bri...
Hey guys, I have ASA5525, FPR2110, and old 5515. On all of them, the SSL setting is:ssl server-version tlsv1.2ssl client-version tlsv1.2ssl cipher default fipsssl cipher tlsv1 fipsssl cipher tlsv1.1 fipsssl cipher tlsv1.2 fipsssl cipher dtlsv1 fipsss...
HiI need to restrict the anyconnect user to use the company laptop not a personal device to connect with VPN to the network. Is there any way to restrict it via ASA or anyconnect settings?kind of checking mac address or etc
I just put a static route on R4 and redistributed into EIGRP to simulate an EIGRP external route. R1:interface GigabitEthernet0/0ip address 172.20.20.1 255.255.255.0!interface GigabitEthernet1/0ip address 10.200.200.1 255.255.255.0negotiation auto!ro...
