About John Pong

John Pong · 11-09-2014

We have 2 Nexus 7000 running NX-OS version 6.2.8a and have configured EIGRP between them. Equal Cost Multi Path seems to be not working when we tried to verify the interface statistics even if we are seeing that both routes are installed in the routi...

John Pong · 09-08-2014

I was testing esp-null as configured in a transform-set in IOS under the impression that the payload will not be encrypted however I am unable to view the payload in clear-text.I just wanted to know if payload can be seen in clear-text since esp-null...

John Pong · 08-04-2014

Hi guys, We were trying to run the "ip ssh rsa" command on a Cisco 7600 router however it is not supported. We wanted to perform this without having to modify the existing crypto rsa keys. Is there any equivalent command for "ip ssh rsa"?

John Pong · 07-13-2014

We need to enroll our GMs to our KS's via PKI. Is there a way for us to enroll all our router using the same certificate/CSR? Thanks!

John Pong · 09-22-2013

Hi guys,As per the link below, I could only configure 16384 routes (sharerd between IPv4 and IPv6 prefixes).http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration_limits/limits_521/nexus_5000_config_limits_521.htmlAre there an...

John Pong · 09-10-2014

I am looking at the pcap capture between the two VPN devices but I am unable to see the type of traffic underneath those ESP packets. I'm not sure if it was just the config or something else beyond my comprehension. Thanks!

John Pong · 08-05-2014

Thanks mohanak for your time. Unfortunately I wasn't able to find the answer to my inquiry above from the link you shared. If you think I missed it, kindly post the exerpts here or maybe discuss it.

John Pong · 08-05-2014

For ease of deployment purposes without involving the CA server. But this setup wasn't deployed in our production environment.

John Pong · 08-04-2014

Hi Narcis,Thanks for your response. I was able to perform this however there are some drawbacks since you are using the same certificate signed by the CA, there will be no identity between the devices involved. Aside from that, there is an alarm bein...

John Pong · 06-04-2013

Thanks Inayath for the inputs. I tried to the "diagnostic bootup level complete" command however I was not able to input the command.

Member Since	‎06-04-2013 11:08 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	15

User Statistics

User Activity

Nexus 7000 EIGRP Equal Cost MultiPath not working

esp-null transform-set query

ip ssh rsa command not supported on modular devices (7600, 6500). Is there a replacement / similar functionality command?

PKI Enrollment for GETVPN

Nexus 5500 maximum ipv4 routes

I am looking at the pcap

Thanks mohanak for your time.

For ease of deployment

Hi Narcis,Thanks for your

Nexus 7000 module powered-dn status