Hi Daniel,Abraham, Thats true, there is requirement for WLAN to have either Open or WPA2 AES encryption with WMM enabled in both 802.11n &802.11ac. Also we need to use the Iperf for throughput tests and not the internet speed test. You can select 80M...

Hi Daniel, How are you verifying the 70Mbps on wireless, via Iperf? http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/112055-tshoot-11n-speeds-00.html#topicsub1 -What is the AP model you use? -What band 2.4/5Ghz -802.11n/...

Hi Here is some info : http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117717-config-wlc-00.html#anc19 Does the web portal login ever work, from your description could be an incorrect ACL or DNS issue. -What ...

Hi Stephen, Available channels for UNII-2 extended band in Australia seems to be similar to US as per the FCC rules and regulations: Attached screenshots from the below mobility enterprise doc. So from: UNII-2 Extended (5.470 to 5.725 GHz) Non-overla...

Hi Istvan, I am against that idea, using splitters to increase coverage will be a bad choice and will result in incorrect design,increase the troubleshooting hours/cost and worst of all result in a bad wireless network performance. Besides if you pla...