Hello Everyone,
I am sure most of you might have already guessed the topic after looking at the title :)
Well I currently have a task on my plate, where I need to make sure that the Airplay traffic flows between 2 different VLANs, to be exact I h...
Hello Everyone,
I have a simple setup,
Access Switch 2<-- Port Channel 20 ----->Core Switch <---- Port Channel 10 --> Access Switch 1
Access Switch 1 connects to the Core Switch using Port Channel...
Hello All,
I am building a small lab utilizing Collapsed Core Design.
1 Nexus 3548 is acting as a Core Switch and there are multiple 2960x Catalyst Switches acting as Access Switches.
My Nexus Switch is running Layer 3 LAN Enterprise License + Bas...
Hello Experts,
I am trying to build a simple lab with collapsed core.
Catalyst 4500-X seems to be an ideal choice for our lab environment but I am also inclined towards Nexus 3524.
Agreed that Nexus 3524 is more or less like an Access switch in the ...
Hello Experts,
I am using MRTG software to plot the link utilization of my Nexus 7K switch.
However, VLAN interface utilization is not getting plotted.
While all the other port channel and physical interfaces are getting plotted.
Is there any known...
That's interesting....Is this switch connecting endpoints like laptops ? or is it connecting servers/Esxi hosts ?
Also can you post the configuration of the switchports.
Hello Flavio,
On the Linksys, I do not see any firewall option.
Linksys is currently working in Bridged mode and providing wireless access to VLAN 50.
-Harsha
Hello,
Since you do not have a router, you need to enable the querier.
ip igmp snooping querier
mrouter -- is the port to which your multicast router/source is connected to.
Immediate-Leave --- When you configure immediate leave, host tracking is...