Hi,We have DNS issue on the firewall, although DNs has been configured as below but we firewall 'debug dns' still showing below error message.FirePower/pri/act# ping www.google.com ^config:=======dns domain-lookup ...
Hi,I have new FirePower ASA 1120 to register for Smart license. I have used the usual process to get the Token form the Cisco Smart account and add it to the device. Although I have 10 devices license available but my license status remain as below;...
Hi, Please guide that when configuring NAT on the Cisco ASA, do 'Original Destination IP' & 'Translated IP' should be routed through same interface? Or is it possible that 'Original Destination IP' belongs to "dmz" interface and 'Translated IP' route...
Hi,Please guide to upgrade the ASR1001-X with below queries; Question1: I like to upgrade to new recommended version i.e. asr1001x-universalk9.17.03.04a.SPA.binIs it direct upgrade, from current Version 16.03.07 ?Question2: Do I need to upgrade the R...
Hi, I want to extract the APIC config that which BD(subnets) is linked with which EPG & further how that EPG is configured with , Physical port, encap, Domain(Phy/VMM) and IPG. I want to extract the information on excel to get an overview of the APIC...
Hi Leo, Thanks for sharing the details.1) In the guide of above link , its mentioned as below(that boot-variable should point to “packages.conf” file"), but my current boot variable is pointing to .bin file, and router is working okay. Please advice ...
Hi @Sergiu.Daniluk Have you used the tool. 'Network Deployment Tool', I have heard that it can import the config e,g Tenant/EPG and contract from excel sheet, then validate with ACI via python, once satisfied, PUSH the config. All config Push and Va...
Thanks a lot to both @ecsnnsls & @RedNectar Much appreciated.@RedNectar Thanks a lot for spending your Sunday time for me When I enter below cmd, I get output as below, hope something not gone wrong, please advise apic1# bashAPIC-01:~> icurl -s -k "h...
