About thomas.heins

thomas.heins · 06-23-2013

Hello guys,I was wondering if it was possible to create a vsan trunk between the cisco UCS 6200 FI and a Nexus 5500 UP.I see how to configure vsan trunking on UCS and on Nexus 5500 but it is said in the Nexus config guide that :Trunking configuration...

thomas.heins · 06-25-2013

Thanks for your quick response guys.Sadly I cannot try in my lab so I will wait to go back to my client.I'll let you know what happened.Thomas

thomas.heins · 06-24-2013

Hi,Did you try to unconfigure/reconfigure your FEX ?Did you try to downgrade/upgrade again the switch ?Regards

thomas.heins · 06-24-2013

May I add this:If you want to keep the downtime as little as possible, verify the master/slave state of your node regarding your FEX.If you have a host dual homed on two FEXs and FEXs have the same master, you will experience a reboot of your FEXs at...

thomas.heins · 06-24-2013

Hi Carlos,Thanks for your quick response.I will try tommorrow in my lab.As said by Dynamoxxx, Do you think it is possible on N5K ?The only configuration I've found in N5K Configuration guide was for TE and not TF ...Regards,Thomas

Member Since	‎10-28-2011 04:58 AM
Date Last Visited	‎10-19-2018 11:12 PM
Posts	8

User Statistics

User Activity

VSAN Trunking on Nexus 5500UP/UCS

VSAN Trunking on Nexus 5500UP/UCS

Cisco B22HP Fabric Extender F/W upgrade failure

Nexus 5020 running NX-OS ver4.1(3)N2(1)

VSAN Trunking on Nexus 5500UP/UCS