Hello,Im exploring adding the wired side of the network into prime(2.1). I have added the range of switches and IOS below. Only some appear to be returning client IP addressing.Is the IOS im using out of date? Or NCS issue?thanksS Cisco 3750 Stackab...
Afternoon,I have AAA authentication/authorization setup for login into ASA9.0 firewalls.When a user is authenticated via ASDM, its generating 20/30 lines in the log file. I have tried using radius and seem to get the same results. When login to one ...
Morning,I upgraded a WLC this morning from 7.2.110.0 to 7.4.121.0 using the method below.Upgraded WLC Preload all APS. Checked and the new image was the backup.Swop backup to primary on the APs.Shut the AP Mgmt SVI to trap at L3 and stop migrating to...
Morning,Im just going through testing VSS on 2*4500x, when i pull the power from the Standby or Active unit the host's see a 6 ping drop out.Am i expecting to much by having 0 loss or have i missed some fail over configuration?Many thanks for any hel...
Good Afternoon,Im just in the process of designing a new core replacement using 4500x in a VSS configuration.I have about 15/20 port channels to Distribution Cabinets. How many of these should i add into the VSS domain as trusted port channels in the...
Hi Marvin,I thought that but I've had mixed results. The 3750x(IOS 15) is L2 and can see the client IP addresses. The other 3750 (IOS12.2) is L3 cannot get Any client dataI have now added the 6509 core, running 12.2(33)SXJ3 and its finding only 4 ...
