I've been using a script on a BUNCH of SG300's and it works just fine. But now I have an SG350 and the script won't work. Essentially it's calling plink.exe and pointing to a TXT file telling the switch to run commands (a simple sh ver, sh run). I ca...
Hey all! Need some help getting plink commands to run on my Small Business switches. I've specifically tried this on SF300 and SG300 and it does the same thing on both devices. I am trying to execute plink to run a simple sh run command. Plink can co...
I have spent a few hours researching different QoS settings and I want to hit my head on sharp objects. So I figured I would post here to get the advice of all you smart people I have a server that generates a lot of traffic at times. I want to QoS t...
Hey all, I fee like I have a fairly simple setup here and I have configured something similar before with no issues. I am not seeing any traffic in my priority queue no matter what I have tried.Cisco ASA 5505, have an in house phone server in the DMZ...
Hello all,I have a Catalyst 3750 that is connected via a point to point fiber connection to another location that has another Catalyst on the other end. At this remote location is a server that replicates data to a server on my end...
Posh-Cisco says its for Catalyst switches, the small business switches like the SG350 don't behave the same way. Also I believe Posh-Cisco is built off Posh-SSH which I tried and didn't work. Have you used Posh-Cisco on the SG350?
I feel like you're right. Like I mentioned I've tried plink, klink, Posh-SSH, OpenSSH. So apparently none of these can work with the new SSH. I can't do linux unfortunately as this is at a customer location and they do not have resources for that.
Nope. If I try to use a txt file with plink to pass through the commands I do get an error from plink that says:Received disconnect from device.Packet integrity error It's interesting because it will receive the command and start processing it, and t...
Just came across this but I have seen this issue on the SPA525G2 as well on firmware 7.4.8 and 7.5.5.Overall what I've learned is that Cisco phones are extremely buggy and good luck getting any sort of resolution. Since we don't sell a Cisco backend,...
