Hi Antonio, curious to see if you had success with this project? can we connect offline?

Hi Rasika,can you share more about your deployment? I believe you are already in talks my team to di...

can you try resetting the AP and installing a new recovery image from cisco.com? then just download ...

what code? can you share show tech wireless? what port is this AP connected to?

am guessing spectralink would send the data at priority 6 anyways and i doubt for voip traffic the S...

yes this means aggregation can happen if the STA gains the txop and chooses to send aggregated frame...

why use mac filtering with webauth? jsut use webauth alone and finish the client flow (redirect, und...

Hi Amir, sorry i missed that update. I looked at the debugs and i dont see anything wrong. just that...

sounds like network issues. if you want to go deep. take a span capture of the AP port and see where...

i tested the AP name:ssid on 8.0.110.0 and it works. check the screenshot from ISE

no there are no jobs that run periodically. you may need to see if there are RF related issues. also...

did you try a wireless to wireless thoroughput test with UDP using iperf?

so the current data rate is m15. assuming this is 20 mhz channel and 800ns long guard interval the l...