Hi allDoes anybody know how to increase server timeout more than 30 sec, may be 60 sec.Our LDAP structure very deep, 5 levels - I mean login accounts placed on the 5th level from the top.I configureed web-authentication via LDAP, for test I created n...
Hi allI ahve some problem with web authentication via LDAP on WLC.I configured all as CISCO recommends, Authentication is passed well via LDAP - there is popup that Login Succesful. IP from DHCP correct.But no browsing - no any page opening.WAN DNS i...
Hi
1. copy from tftp server to flash.
2. next command: boot system flash:// (here write your new image).
3. if something wrong: just rewrite - boot system (to old image).
Here my config for: IPv6 multipoint GRE Tunnel over IPv4 DMVPN (as you pointed on topic).
I tested it and it working. I remove vrf it is not needed for DMVPN tunnel. And I also changed IPv6 addresses of tunnels and remove unnecessary commands, to be ...
Hi Kevin
As i know I can make tunnel IPv4 over IPv4 or IPv6 over IPv4 or IPv6 over IPv6
Here all three configured together. I would prefer to choose only one, at least, for troubleshooting.
But at first glance I did not see here the multicast map c...
