yogesh bhalerao
Member since ‎12-31-2010

User Statistics

  • 124 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 5 Helpful votes Received
Recent Badges
1 Helpful Vote
50 Replies
20 Replies
10 Replies
5 Replies

User Activity

Hi TeamI am exhausting my current 4 digit VoIP dial plans and soon need to implement New VoIP dial plan keeping in mind the existing dial pattern My DID numbers are different then my VoIP numbers e.g 6666 9202 and voip :- 1202  Currently i am thinkin...
Hi AllI want to add EPABX in CUCM (10.5) , i want IP Phone to dial out using the EPABX , Any suggestions or the same and how to go about it Thanks in Advance 
Hi Guys I am having issue in incoming call in SRST Jun 24 12:10:23.944: ISDN Se0/1/0:15 Q931: RX <- SETUP pd = 8  callref = 0x0029    Sending Complete    Bearer Capability i = 0x8090A3        Standard = CCITT        Transfer Capability = Speech      ...
HiI have Ip phone, connectivity as follows IP Phone-- CUCM ---CUCM has PRI-QSIG with EPABX -- ROUTER IS registered as MGCP Gateway the Location analog phone and Ip phone have same series numbers e.g. 3001 (analog) 3002(IP Phone) But when i call via I...
HII am not able to receive incoming call via my PSTN , Also i am not able to dial local call via my PSTNI am able to dial STD and ISD calls but not able to receive incoming from STD,ISDCUCM:- 10.5 Please find the traces Dec 29 06:47:55.227: ISDN Se0/...
Community Statistics
Member Since ‎12-31-2010 03:21 AM
Date Last Visited ‎10-11-2020 10:53 AM
Posts 124
Total Helpful Votes Received 5
Helpful Votes From