Dear Readers and Guru's, We are using a Cisco SX20 with ISDN Link due to some our regional offices still using ISDN connection, anyways, this is working fine. The only problem I am experiencing is the fact there are a lot of unknown established calls...

Dear Readers and Guru's, We are using a Cisco SX20 with ISDN Link due to some our regional offices still using ISDN connection, anyways, this is working fine. The only problem I am experiencing is the fact there are a lot of unknown established calls...

Hi Guys,It's me again.. First of all i wanna say thanks to TOM for helping out with our Tandberg MXP880, it is working fine now. There is another predicament that we are experiencing with our new device.Let me just give you a short input about it:The...

Hi Guys,Hope you can give me some insights with the issue we are having with this device. Before we are using 3 ISDN2 Lines for the codec as the need to have a faster connection we had decided to add one last ISDN2 line, so we use the ISDN BRI4 for t...

we have a Tandberg MXP880 video conference device in the office that we've been using for more than 3 years now with ISDN connection and sometimes through LAN. Accepting video calls from one of our site in Japan is okay and having a 3 way video confe...