not that I enjoy the vCentre web client anyway, but if your unfortunate enough to have 6.5 and you really need to deploy a 2.7 or 2.8 CWMS cluster, what are the options? There must be some workaround surely? Moving to 3.0 isn't an option for me at th...
Hi,
I have a situation where I wan't to make a point-point call between two jabber softphone endpoints (Jabber for Windows, UCM 10.5). However, I would like one end of the call to have a USB webcam that can be PTZ moved via FECC from the other end. ...
Hi,
I have a number of 3702i AP's that are all capwap back to a 5760 controller.
We have setup a new SSID for some equipment that needs to connect to other equipment on the same SSID, this SSID goes onto a dedicated vlan, there is no layer 3 interfa...
Hi, I have a need two change the dns name that my cucm and imp servers are in.So I am changing ALL servers in the 10.5(1) cluster from hostname.old_domain to hostname.new_domainI have read and followed the guide for performing the domain name change ...
Getting very stuck and frustrated with some testing of a new PSTN SIP trunk to replace a large estate of E1's. Hopefully someone far cleverer than me in all things MGR's related can help!I'am having real trouble getting the SIP trunks to invoke a tra...
Hi Reza,
Sorry to jump on an old post but I've just read this and found it very useful. I'm trying to get EIGRP working on a 4500X-VSS cluster. Having done the licence right-to-use entservices accepteula it appears that the licence (hardware was pur...
Hi, this post on the licence being honor based was very useful.
Do you know if this is still the case nowadays? Also, I understand that the whole platform can be licensed so it will work up to the maximum allowable on that platform. How can you tell ...
Hi,Thanks for your reply, that's very helpful.If I want to alter those digits can this be an application rule or as it's a sip trunk do I need a translation pattern on the CSS of the trunk?JonSent from Cisco Technical Support iPhone App
Hi, dialplan.xml would probably do it, if not the above should work if the translation pattern and partition are available to the inbound CSS of your sip trunkSent from Cisco Technical Support iPhone App
Hi Ben.Are you using the UKNP? If not then it's easy, if you are this advice may not hold true.This is possible, but you need to make a new partition and calling search space for each STD code that your users are physically located.Assuming you dial ...
