My N2K connected to N5K, why some ports can set the port speed, and some cann't set the port speed?int eth102/1/25 ！！！No speed command(config-if)# ? beacon Disable/enable the beacon for an interface cdp Configure CDP interf...
Ok, I think I found the reason, if a physical port has been added to the port channel, duplex and speed option can only be configured in interfce port-channel mode.Thanks.
show run int eth102/1/25 all !Command: show running-config interface Ethernet102/1/25 all!Time: Tue Apr 14 14:33:38 2009 version 6.0(2)N1(2)interface Ethernet102/1/25 no description lacp port-priority 32768 lacp rate normal priority-flow-contro...
