About chaitanya_datar

chaitanya_datar · 03-05-2010

During the firmware upgrade of a DMP 4300 from Ver. 5.0 to Ver. 5.0.2 there was a disconnection and the upload of firmware image was interrupted.The DMP now does not boot and gives no display at all. It shows the red led indication but does not try t...

chaitanya_datar · 06-15-2010

If you are trying to access the DMP 4400 having the version 5.2 you need to use https instead of http. Try the following command and it should work.https://:7777/get_param?p=xxxxxx

Member Since	‎06-05-2008 11:27 PM
Date Last Visited	‎07-12-2022 10:05 AM
Posts	5

User Statistics

User Activity

DMP 4300 Firmware Upgrade

Re: How to access the MIB on DMP 4400g w. #5.2