Hi Daniel,If you are truly in an L3 deployment (where the users reside at least one L3 hop away from the CAS) then you will not be able to use VLAN ID as a valid mapping condition, because the CAS will not know what Vlan the user is coming from. ...
Hi Andrea,In 4.7.2 there wasn't much you could do within the CAM itself - really you could just export them from the GUI into a spreadsheet and analyze based on that.The CAM does have an API however that would allow you to export reports via scriptin...
Thanks for the clarification.So its hitting the rule called "Network Device Authorization" and returning the "Full Access" Shell profile. What are the conditions for that rule? Can you send a screenshot of that page?Thanks,Nate
Hi pemasirid,Can you send a report from the Monitoring and Reporting section of the ACS? Go to that section > Reports > AAA Protocol > TACACS/Radius Authentication (whichever you are using) and click the details icon next to a failed authentication. ...
Hi donaghq,You will more than likely have to reboot (if you didn't save the configuration then it will revert to the old password) or if you did save the configuration after making the change, perform a password recovery via the link below:http://www...