Hi. I'm wondering how to increase the call capacity on an 8945 phone. The user has received a couple messages "Call Failed – Maximum call per line limit reached" when trying to transfer a call. The user has their personal ext on button 1 and shared...
Please redirect to BE3000 community if it exists.Where can I find Cisco Unity Connection docs for the BE3000? I'm looking for a report that shows unanswered voicemails at the end of a day. Maybe a MWI report?Thx, Jim
I had this error when after rebooting my Windows 7 machine which was running on VMware Fusion. I noticed that the boot was very slow, due to programs running on the Mac side of my computer. When I stopped the Mac programs and rebooted the Windows 7...
Can phone firmware be upgraded on 8.6.4? For instance, I would like to upgrade 69XX phone firmware to 9.3 from the 9.2 version that shipped with 8.6.4.If this upgrade is possible, is this as simple as loading the cop file using the BE3000 Maintenanc...
We have echo on 6945 w 9.2.2.4 without a SPA.The echo is heard by the outside party when the 6945 user is on speaker phone. It is most prevalent when using an external conference bridge. Swapping an 8945 phone fixed it.Jim
Sanjay:As far as the call sequence, all the user can remember is that they were trying to transfer a call and they got the "Maximum call per line" message. Are there any guesses about what is the most likely cause for this? Would one call holding,...
Please confirm...1) From the upgrade>upgrade image location page on the BE3K, select the 6945 file as the file to upload?2) I'm going to use the cop.sgn file, right?Since this is undocumented, is there anything else I should know?The 8.6.3 to 8.6.4 ...